Tathastu Electrostatic System

Tathastu electrostatics is the Tailor-Made solution for existing spraying systems. The conventional spraying system has all other thing like air fans, liquid pressure pumps, good quality nozzles and experience with existing system. Tathastu electrostatic use these all things as it is. Tathastu electrostatic having a high voltage generation unit with require power. This unit generate high voltage using nominal 12 volt battery. It has one input, one out put and one control. 12 v use as a input voltage, one out put is control unit and other one is high voltage output. control unit is use for On/Off the electrostatic induction. The high voltage cable output is connect to the HV electrode. Electrode is design around the nozzle as per customer spraying unit.

Tathastu Electrostatic generate strong induction type electrostatic field around the nozzle. The high voltage electrode assembly is design with precision and experience. High voltage insulator design for very high spraying water environment which will keep isolation between high voltage supply and assembly. In weak isolation voltage will be drop down and induction effect will be less . But in Tathastu electrostatic effect will be constant in all condition.

When water or any spray comes through the nozzle, the high voltage electrode charge the water drop ,with same charge, they repel each other, creating a fine spray mist. On the other side plant having opposite charges, which attract the opposite charge particles drawing from the nozzle. The spray droplet goes deep inside the plant's canopy. One more added advantage is that they never overlap each other. because up to target surface same charge droplet repel each other. The plant is covered fully and uniformly.